nissan versa tiida

nissan versa tiida driveline axle rear


NISSAN VERSA TIIDA DRIVELINE AXLE REAR

DRIVELINE AXLE REAR

CONTENTS
PREPARATION
Commercial Service Tools

nissan versa tiida driveline axle rear

NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING
NVH Troubleshooting Chart

nissan versa tiida driveline axle rear

WHEEL HUB
On-Vehicle Inspection and Service
REAR WHEEL BEARING INSPECTION
Removal and Installation
COMPONENTS
REMOVAL
INSPECTION AFTER REMOVAL
INSTALLATION
SERVICE DATA AND SPECIFICATIONS (SDS)
Wheel Bearing

Nissan Versa Tiida
PREPARATION
Commercial Service Tools
Tool name Description
Power tool
Description
Removing wheel nuts Removing wheel nuts

NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING
NVH Troubleshooting Chart
Use chart below to help you find the cause of the symptom. If necessary, repair or replace these parts.
Reference page
Possible cause and SUSPECTED PARTS
Symptom REAR AXLE

Improper installation, looseness
Parts interference
Wheel bearing damage
REAR SUSPENSION
TIRES
ROAD WHEEL
BRAKES
STEERING

Noise
Shake
Vibration
Shimmy
Shudder
Poor quality ride or handling

WHEEL HUB
On-Vehicle Inspection and Service
Check the axle and suspension parts for excessive play, wear, or damage.
Shake each rear wheel to check for excessive play as shown.

REAR WHEEL BEARING INSPECTION
Move wheel hub and bearing assembly in the axial direction by hand. Make sure the axial end play is within specification.
Axial end play : 0.05 mm (0.002 in) or less
Check that the wheel hub bearing operates smoothly.
Replace the wheel hub assembly if the axial end play exceeds specification, or if the wheel bearing does not turn smoothly. Refer to RAX-4, “Removal and Installation” .
CAUTION:
The wheel hub assembly does not require maintenance. If any of the following symptoms are noted, replace the wheel hub assembly.
Growling noise is emitted from the wheel hub bearing during operation.
Wheel hub bearing drags or turns roughly.

Removal and Installation
COMPONENTS

nissan versa tiida driveline axle rear

  1. Rear suspension beam
  2. Back plate
  3. Wheel hub and bearing assembly

REMOVAL

  1. Remove tires from vehicle using power tool.
  2. Remove wheel sensor from wheel hub and bearing assembly. Refer to BRC-33, “WHEEL SENSORS”.

WHEEL HUB
CAUTION:
Do not pull on wheel sensor harness.

  1. Remove the drum brake assembly. Refer to BR-31, “Removal and Installation of Drum Brake Assembly”.
  2. Remove wheel hub and bearing assembly bolts, and then remove wheel hub and bearing assembly from vehicle.
  3. If necessary remove back plate, following procedure.
  4. Remove parking brake rear cable from back plate. Refer to PB-4, “PARKING BRAKE CONTROL”.
  5. Separate brake tube from wheel cylinder. Refer to BR-11, “BRAKE TUBE AND HOSE” .

INSPECTION AFTER REMOVAL
Check for any deformity, cracks, or other damage on the wheel hub assembly, replace if necessary.
CAUTION:
The wheel hub assembly does not require maintenance. If any of the following symptoms are noted, replace the wheel hub assembly.
Growling noise is emitted from the wheel hub bearing during operation.
Wheel hub bearing drags or turns roughly.

INSTALLATION
Installation is in the reverse order of removal.

SERVICE DATA AND SPECIFICATIONS (SDS)
Wheel Bearing EDS003R2
Axial end play 0.05 mm (0.002 in) or less

nissan versa tiida driveline axle rear – ManualesAutomotricesWeb.com

Ultimos productos de nuestro catalogo

driveline axle rear, nissan, nissan versa, nissan tiida,driveline, axle, rear,driveline axle, rear,driveline rear, wheel, hub, beare, assemb, removal, rear, installation, remove, brake, service, play, inspection, tool, refer, axial, replace,noise